ISSN 2708-244X
 

Review Article 


Comparative Study of Mechanical and Morphological Properties of Alumina Coatings Treated by Conventional Furnace and Laser Processing

YUOSEF ABDALLA ADRAIDER, Husein Meshreghi.

Abstract
Abstract-Alumina coatings were prepared via sol-gel route and then dip-coated on the surface of AISI316 substrates. The alumina-coated substrates were treated by two methods include conventional heat treatment furnace and laser processing to study and compare the phase transition and the mechanical properties of sol-gel alumina coatings. The scanning electron microscope (SEM) and X-ray diffractometer (XRD) were employed to analyse surface morphology and crystalline structure respectively, whilst the mechanical properties were measured using nano-indentation measurements. The results show that the alumina coatings have converted into crystalline aluminium oxide in both phases of γ-Al2O3 andα-Al2O3. Nano-indentation measurements reveal that the mechanical properties of laser-irradiated alumina coatings in terms of hardness and Young’s modulus are much higher than that of the same alumina coatings treated by conventional furnace heating.

Key words: Keywords:Alumina coatings; AISI316 substrates; laser processing; furnace heating; Aluminium oxide; Mechanical properties.


 
ARTICLE TOOLS
Abstract
PDF Fulltext
How to cite this articleHow to cite this article
Citation Tools
Related Records
 Articles by YUOSEF ABDALLA ADRAIDER
Articles by Husein Meshreghi
on Google
on Google Scholar

How to Cite this Article
Pubmed Style

YAA, Meshreghi H. Comparative Study of Mechanical and Morphological Properties of Alumina Coatings Treated by Conventional Furnace and Laser Processing. AJAS. 2021; 2(2): 27-30.


Web Style

YAA, Meshreghi H. Comparative Study of Mechanical and Morphological Properties of Alumina Coatings Treated by Conventional Furnace and Laser Processing. http://www.albahitjas.com/?mno=85235 [Access: July 31, 2021].


AMA (American Medical Association) Style

YAA, Meshreghi H. Comparative Study of Mechanical and Morphological Properties of Alumina Coatings Treated by Conventional Furnace and Laser Processing. AJAS. 2021; 2(2): 27-30.



Vancouver/ICMJE Style

YAA, Meshreghi H. Comparative Study of Mechanical and Morphological Properties of Alumina Coatings Treated by Conventional Furnace and Laser Processing. AJAS. (2021), [cited July 31, 2021]; 2(2): 27-30.



Harvard Style

, Y. A. A. & Meshreghi, . H. (2021) Comparative Study of Mechanical and Morphological Properties of Alumina Coatings Treated by Conventional Furnace and Laser Processing. AJAS, 2 (2), 27-30.



Turabian Style

, YUOSEF ABDALLA ADRAIDER, and Husein Meshreghi. 2021. Comparative Study of Mechanical and Morphological Properties of Alumina Coatings Treated by Conventional Furnace and Laser Processing. Albahit journal of applied sciences, 2 (2), 27-30.



Chicago Style

, YUOSEF ABDALLA ADRAIDER, and Husein Meshreghi. "Comparative Study of Mechanical and Morphological Properties of Alumina Coatings Treated by Conventional Furnace and Laser Processing." Albahit journal of applied sciences 2 (2021), 27-30.



MLA (The Modern Language Association) Style

, YUOSEF ABDALLA ADRAIDER, and Husein Meshreghi. "Comparative Study of Mechanical and Morphological Properties of Alumina Coatings Treated by Conventional Furnace and Laser Processing." Albahit journal of applied sciences 2.2 (2021), 27-30. Print.



APA (American Psychological Association) Style

, Y. A. A. & Meshreghi, . H. (2021) Comparative Study of Mechanical and Morphological Properties of Alumina Coatings Treated by Conventional Furnace and Laser Processing. Albahit journal of applied sciences, 2 (2), 27-30.





Most Viewed Articles
  • Trends in Designing Databases for E-learning Systems
    Husam Ali Suleiman Khalifa
    AJAS. 2020; 1(1): 16-21
    » Abstract

  • Global Optimization of SMHS to Enhance The Performance of Diversity and Sensitivity via Comparing with HS and other Existing Methods
    Khamiss M. S. Ahmeda, Mahmmoud Alawanb, Fatima Mustafac
    AJAS. 2020; 1(1): 38-43
    » Abstract

  • Recycling Building Demolition Waste as an Asphalt Binder Course in Road Pavements: a Case Study in Benghazi
    Manal S Ali Abmdas S Ali Abmdas, Halima Saeid Omar Saeid
    AJAS. 2020; 1(1): 28-34
    » Abstract

  • Chemical specifications for raw materials used in the Kufa cement industry in Iraq
    Jameel Al-Naffakh, Mohammed Al-fahham, israa kadum
    AJAS. 2020; 1(1): 65-69
    » Abstract

  • Evaluation of Geostatistical Interpolation Methods For Rainfall data Estimation In Libya.
    Lubna soliman BenTaher
    AJAS. 2020; 1(1): 54-59
    » Abstract

  • Most Downloaded
  • Physical and Mechanical properties of expanded polystyrene lightweight aggregate concrete
    Abdel Nader Khalil Aldabar, Osama Mohamed Khalifa, Abdulmutaleb Mohamed Ahmidan
    AJAS. 2020; 1(1): 22-27
    » Abstract

  • Effect of Tilt angle and Azimuth angle on the Global irradiance using the PVsyst software for Alkhums-Libya
    Mohamed Juma Hamed, Shukri Adbar
    AJAS. 2020; 1(1): 60-64
    » Abstract

  • A Review on the development of TiO2 photoanode for Solar Applications
    Abdulbaset A Awshah, Bashir Rahuma Elhub, Saleh H Alazoumi,
    AJAS. 2021; 2(2): 9-16
    » Abstract

  • Experimental Study on Addition Palm Date Fibers as Reinforcement in Gypsum Mortar
    HANA AS ALJEWIFI,
    AJAS. 2021; 2(2): 31-37
    » Abstract

  • Comparative Study of Mechanical and Morphological Properties of Alumina Coatings Treated by Conventional Furnace and Laser Processing
    YUOSEF ABDALLA ADRAIDER , Husein Meshreghi
    AJAS. 2021; 2(2): 27-30
    » Abstract

  • Most Cited Articles