ISSN 2708-244X
 

Review Article 


Mechanical properties and phase-transition of laser-deposited sol-gel titania coatings

yuosef abdalla adraider.

Abstract
Titanium oxide coatings were fabricated via a combaine laser/sol-gel technique. The deposition of sol-gel titania coatings on AISI316 substrates is conducted using fibre laser irradiation (λ=1064 nm) in continuous wave mode under wet condition with different laser specific energies. ATR-FTIR, XRD, SEM and EDS were used to investigate the phase composition, crystalline structure, surface morphology of the laser-deposited titania coatings, whilst the mechanical properties were measured using nano-indentation. The results illustrate that the laser irradiation led to the deposition of titanium oxide coatings in both crystalline phases, anatase and rutile at various processing conditions. The optimal theoretical ratio of 1:2 in TiO2 is obtained for the deposited titania coatings under the influence of laser energy. Nano-indentation measurements confirm that the mechanical properties of laser-deposited titania coatings are significantly improved.

Key words: Sol-gel Titania coatings; Fiber Laser; titanium Oxide; Mechanical properties


 
ARTICLE TOOLS
Abstract
PDF Fulltext
How to cite this articleHow to cite this article
Citation Tools
Related Records
 Articles by yuosef abdalla adraider
on Google
on Google Scholar

How to Cite this Article
Pubmed Style

adraider ya, . Mechanical properties and phase-transition of laser-deposited sol-gel titania coatings. AJAS. 2020; 1(1): 44-47.


Web Style

adraider ya, . Mechanical properties and phase-transition of laser-deposited sol-gel titania coatings. http://www.albahitjas.com/?mno=103678 [Access: July 21, 2020].


AMA (American Medical Association) Style

adraider ya, . Mechanical properties and phase-transition of laser-deposited sol-gel titania coatings. AJAS. 2020; 1(1): 44-47.



Vancouver/ICMJE Style

adraider ya, . Mechanical properties and phase-transition of laser-deposited sol-gel titania coatings. AJAS. (2020), [cited July 21, 2020]; 1(1): 44-47.



Harvard Style

adraider, y. a. & (2020) Mechanical properties and phase-transition of laser-deposited sol-gel titania coatings. AJAS, 1 (1), 44-47.



Turabian Style

adraider, yuosef abdalla, and . 2020. Mechanical properties and phase-transition of laser-deposited sol-gel titania coatings. Albahit journal of applied sciences, 1 (1), 44-47.



Chicago Style

adraider, yuosef abdalla, and . "Mechanical properties and phase-transition of laser-deposited sol-gel titania coatings." Albahit journal of applied sciences 1 (2020), 44-47.



MLA (The Modern Language Association) Style

adraider, yuosef abdalla, and . "Mechanical properties and phase-transition of laser-deposited sol-gel titania coatings." Albahit journal of applied sciences 1.1 (2020), 44-47. Print.



APA (American Psychological Association) Style

adraider, y. a. & (2020) Mechanical properties and phase-transition of laser-deposited sol-gel titania coatings. Albahit journal of applied sciences, 1 (1), 44-47.





Most Viewed Articles
  • Trends in Designing Databases for E-learning Systems
    Husam Ali Suleiman Khalifa
    AJAS. 2020; 1(1): 16-21
    » Abstract

  • Global Optimization of SMHS to Enhance The Performance of Diversity and Sensitivity via Comparing with HS and other Existing Methods
    Khamiss M. S. Ahmeda, Mahmmoud Alawanb, Fatima Mustafac
    AJAS. 2020; 1(1): 38-43
    » Abstract

  • Recycling Building Demolition Waste as an Asphalt Binder Course in Road Pavements: a Case Study in Benghazi
    Manal S Ali Abmdas S Ali Abmdas, Halima Saeid Omar Saeid
    AJAS. 2020; 1(1): 28-34
    » Abstract

  • Chemical specifications for raw materials used in the Kufa cement industry in Iraq
    Jameel Al-Naffakh, Mohammed Al-fahham, israa kadum
    AJAS. 2020; 1(1): 65-69
    » Abstract

  • Evaluation of Geostatistical Interpolation Methods For Rainfall data Estimation In Libya.
    Lubna soliman BenTaher
    AJAS. 2020; 1(1): 54-59
    » Abstract

  • Most Downloaded
  • Physical and Mechanical properties of expanded polystyrene lightweight aggregate concrete
    Abdel Nader Khalil Aldabar, Osama Mohamed Khalifa, Abdulmutaleb Mohamed Ahmidan
    AJAS. 2020; 1(1): 22-27
    » Abstract

  • Effect of Tilt angle and Azimuth angle on the Global irradiance using the PVsyst software for Alkhums-Libya
    Mohamed Juma Hamed, Shukri Adbar
    AJAS. 2020; 1(1): 60-64
    » Abstract

  • A Review on the development of TiO2 photoanode for Solar Applications
    Abdulbaset A Awshah, Bashir Rahuma Elhub, Saleh H Alazoumi,
    AJAS. 2021; 2(2): 9-16
    » Abstract

  • Experimental Study on Addition Palm Date Fibers as Reinforcement in Gypsum Mortar
    HANA AS ALJEWIFI,
    AJAS. 2021; 2(2): 31-37
    » Abstract

  • Comparative Study of Mechanical and Morphological Properties of Alumina Coatings Treated by Conventional Furnace and Laser Processing
    YUOSEF ABDALLA ADRAIDER , Husein Meshreghi
    AJAS. 2021; 2(2): 27-30
    » Abstract

  • Most Cited Articles