ISSN 2708-244X
 

Review Article 


Chemical specifications for raw materials used in the Kufa cement industry in Iraq

Jameel Al-Naffakh, Mohammed Al-fahham, israa kadum.

Abstract
The aim of this paper is to provide background information on raw materials included in the cement industry that have been chemically examined in the laboratories of the Kufa Cement Factory in cooperation with AL-Furat Al-Awsat Technical University, Najaf Technical engineering college, Najaf, Iraq.
The raw materials entering the factory were examined, which include stone, crude oil, iron dust, sand, and gypsum, as it was found that the total carbonate ratio is 89% as a weight ratio and the sulfide is smaller or equal to 1% as a weight ratio and the magnesium carbonate is smaller or equal to 3%. For iron dust with sand, the total carbonates of the mixture were smaller or equal to 85%, and magnesium carbonate was smaller or equal to 3%, and silica oxide was also examined in sand where the results of the examination were greater than 85%, and for sulfide oxide smaller than 1%, as well as for iron dust, the proportion of oxide Ferric is greater than 55%, the percentage of alumina oxide is less than 10%, silica oxide is less than 20%, as well as for crude oil, as it contains less than 4% of sulfide oxide, as well as primary and secondary gypsum examination, and it was found that sulfide oxide is greater than 31% if the gypsum is Secondary and greater than 42% if the gypsum is primary and Materials are non-soluble smaller than 8% if it was a secondary gypsum and less than 5% if the primary gypsum. Where these models were examined and analyzed, and the storage location of the models examined was determined.

Key words: Chemical, raw materials, Kufa Cement, laboratory, gypsum.


 
ARTICLE TOOLS
Abstract
PDF Fulltext
How to cite this articleHow to cite this article
Citation Tools
Related Records
 Articles by Jameel Al-Naffakh
Articles by Mohammed Al-fahham
Articles by israa kadum
on Google
on Google Scholar

How to Cite this Article
Pubmed Style

Al-Naffakh J, Al-fahham M, kadum i. Chemical specifications for raw materials used in the Kufa cement industry in Iraq. AJAS. 2020; 1(1): 65-69.


Web Style

Al-Naffakh J, Al-fahham M, kadum i. Chemical specifications for raw materials used in the Kufa cement industry in Iraq. http://www.albahitjas.com/?mno=100304 [Access: July 23, 2020].


AMA (American Medical Association) Style

Al-Naffakh J, Al-fahham M, kadum i. Chemical specifications for raw materials used in the Kufa cement industry in Iraq. AJAS. 2020; 1(1): 65-69.



Vancouver/ICMJE Style

Al-Naffakh J, Al-fahham M, kadum i. Chemical specifications for raw materials used in the Kufa cement industry in Iraq. AJAS. (2020), [cited July 23, 2020]; 1(1): 65-69.



Harvard Style

Al-Naffakh, J., Al-fahham, . M. & kadum, . i. (2020) Chemical specifications for raw materials used in the Kufa cement industry in Iraq. AJAS, 1 (1), 65-69.



Turabian Style

Al-Naffakh, Jameel, Mohammed Al-fahham, and israa kadum. 2020. Chemical specifications for raw materials used in the Kufa cement industry in Iraq. Albahit journal of applied sciences, 1 (1), 65-69.



Chicago Style

Al-Naffakh, Jameel, Mohammed Al-fahham, and israa kadum. "Chemical specifications for raw materials used in the Kufa cement industry in Iraq." Albahit journal of applied sciences 1 (2020), 65-69.



MLA (The Modern Language Association) Style

Al-Naffakh, Jameel, Mohammed Al-fahham, and israa kadum. "Chemical specifications for raw materials used in the Kufa cement industry in Iraq." Albahit journal of applied sciences 1.1 (2020), 65-69. Print.



APA (American Psychological Association) Style

Al-Naffakh, J., Al-fahham, . M. & kadum, . i. (2020) Chemical specifications for raw materials used in the Kufa cement industry in Iraq. Albahit journal of applied sciences, 1 (1), 65-69.





Most Viewed Articles
  • Trends in Designing Databases for E-learning Systems
    Husam Ali Suleiman Khalifa
    AJAS. 2020; 1(1): 16-21
    » Abstract

  • Global Optimization of SMHS to Enhance The Performance of Diversity and Sensitivity via Comparing with HS and other Existing Methods
    Khamiss M. S. Ahmeda, Mahmmoud Alawanb, Fatima Mustafac
    AJAS. 2020; 1(1): 38-43
    » Abstract

  • Recycling Building Demolition Waste as an Asphalt Binder Course in Road Pavements: a Case Study in Benghazi
    Manal S Ali Abmdas S Ali Abmdas, Halima Saeid Omar Saeid
    AJAS. 2020; 1(1): 28-34
    » Abstract

  • Chemical specifications for raw materials used in the Kufa cement industry in Iraq
    Jameel Al-Naffakh, Mohammed Al-fahham, israa kadum
    AJAS. 2020; 1(1): 65-69
    » Abstract

  • Evaluation of Geostatistical Interpolation Methods For Rainfall data Estimation In Libya.
    Lubna soliman BenTaher
    AJAS. 2020; 1(1): 54-59
    » Abstract

  • Most Downloaded
  • Trends in Designing Databases for E-learning Systems
    Husam Ali Suleiman Khalifa
    AJAS. 2020; 1(1): 16-21
    » Abstract

  • Global Optimization of SMHS to Enhance The Performance of Diversity and Sensitivity via Comparing with HS and other Existing Methods
    Khamiss M. S. Ahmeda, Mahmmoud Alawanb, Fatima Mustafac
    AJAS. 2020; 1(1): 38-43
    » Abstract

  • Recycling Building Demolition Waste as an Asphalt Binder Course in Road Pavements: a Case Study in Benghazi
    Manal S Ali Abmdas S Ali Abmdas, Halima Saeid Omar Saeid
    AJAS. 2020; 1(1): 28-34
    » Abstract

  • Chemical specifications for raw materials used in the Kufa cement industry in Iraq
    Jameel Al-Naffakh, Mohammed Al-fahham, israa kadum
    AJAS. 2020; 1(1): 65-69
    » Abstract

  • Evaluation of Geostatistical Interpolation Methods For Rainfall data Estimation In Libya.
    Lubna soliman BenTaher
    AJAS. 2020; 1(1): 54-59
    » Abstract

  • Most Cited Articles